How can I limit bandwidth usage in Bitcoin-qt client?, The Block Magazine

How can I limit bandwidth usage in Bitcoin-qt client?

How can I limit bandwidth usage in Bitcoin-qt client?, The Block Magazine

If your goal is just to get a stable Bitcoin node running, and not to contribute to the network, you can add listen=0 to your bitcoin.conf file. This generally (though not always) keeps your upload bandwidth in check.

If you want to contribute to the Bitcoin network without using up too much of your own bandwidth, however, there are ways of limiting your upload speed for Bitcoin Core (Bitcoin-qt) only. Instructions depend on your OS, so what follows is a breakdown on what to do with each OS.

IMPORTANT NOTE: If you limit the bandwidth of Bitcoin Core far below your actual upload speed, it can actually harm the Bitcoin network instead of helping it. To be a responsible maintainer of the Bitcoin network, you should test your upload speed and then set your outgoing bandwidth limit to be as close to your actual speed as possible (e.g. 90%). This guide is intended solely for people whose internet connections go unresponsive due to Bitcoin Core completely saturating their upload bandwidth.

The following instructions are abridged from this article I wrote recently:

  1. Download and Install NetBalancer.

  2. Start Bitcoin Core if it isn’t already running.

  3. Run NetBalancer.

  4. Find “bitcoin-qt.exe” in the list of running applications in the NetBalancer dialog and double-click it to change its bandwidth rules.

  5. Under “Upload Priority” choose “Limited”, set the maximum amount of bandwidth for Bitcoin Core to use, and confirm.

You’re done! NetBalancer will now sit in the background and make sure Bitcoin Core doesn’t use more bandwidth than you want it to.

OS X 10.10 Yosemite and later

For OS X 10.10 Yosemite and later, there is no easy way to limit the bandwidth of a particular application, but the overall system bandwidth can be limited as follows:

  1. Visit Apple Developer Downloads and log in with your Apple ID.

  2. Search for “Hardware IO Tools for Xcode” and download the latest stable (non-beta) version.

  3. Open the .dmg and double-click “Network Link Conditioner.prefpane” to install the prefpane. From now on, you can enable/disable Network Link Conditioner from System Preferences.

  4. From the Network Link Conditioner pane in System Preferences, click “Manage Profiles”, then click the “+” button to add a new profile.

  5. Edit the profile and add your desired maximum upload speed.

  6. Save your edit, exit the profile manager, choose your new profile, and flip the big switch to enable the limiter.

Mac OS will place an icon in your notification tray so you remember that it’s on. Unlike the Windows/Linux solutions, this will limit the bandwidth for your entire system, so be sure to turn it off you’re not running Bitcoin Core.

OS X 10.9 Mavericks and earlier

For OS X 10.9 Mavericks you can use IceFloor to configure bandwidth rules. For 10.8 Mountain Lion and earlier, use Waterroof. Alternatively, if you want a simple way to control the overall system bandwidth limit instead of just Bitcoin Core, follow the instructions above for OS X 10.10 Yosemite and later.

Limiting Bandwidth on Linux

  1. Make sure you have tc installed by typing tc at the command line. If you get “command not found”, install tc using your favorite package manager. If you’re on a Debian-based distribution, the easiest way to install tc is by using apt-get:

    sudo apt-get update

    sudo apt-get install iproute2

  2. Download the script from the official Bitcoin Core repository using wget:


  3. Open the script in a text editor. Find the line that says IF="eth0" and change eth0 to reflect the network interface that your internet connection runs through. To get a list of your computer’s network interfaces, use ifconfig on the command line. My computer is connected wirelessly through wlan1, so the IF line of my looks like this:


  4. LINKCEIL should reflect the limit of the network interface, and most likely does not need to be changed.


  5. Change LIMIT to be the maximum bandwidth you want Bitcoin Core to use (I chose 1mbit). If you don’t have any other Bitcoin Core nodes in your local network, you can delete the line that says LOCALNET. This line is there to make a bandwidth exception for port 8333 communications within your local network (i.e. not out to the internet).


    Leave the rest of the commands in alone unless you know what you’re doing. The final top section of my ended up looking like this:

    #network interface on which to limit traffic
    #limit of the network interface in question
    #limit outbound Bitcoin protocol traffic to this rate
  6. Exit your editor and make the script executable with the following command:

    chmod +x ./

  7. Run the script as superuser:

    sudo ./

    Your Bitcoin Core bandwidth will be throttled until you reboot your computer!

Optionally, you can set the script to run every time you start your computer. Instructions for running scripts on boot will vary depending on your Linux distribution. On Ubuntu, one of the ways to run a script on boot is by adding the script to your /etc/rc.local file.

Hopefully this post was helpful in showing you how to limit the bandwidth of Bitcoin Core! For the full version, including images and extra information, check out the original article here.

Article First Published here